SW-01A sniper rifle replica - A-TACS AU®
This is the first replica of the multi-caliber SW-01A sniper rifle. This model was made of steel and metal and the only parts made of plastic is the pistol grip. The replica’s body is made of bent steel ( it is about 730mm of a homogenous element! ). The multi-position foldable bipod is also made of steel. The inner barrel with the recoil reducer ( brake ) is made of metal. Inside the replica there is a 590mm long inner barrel. The magazine which is used in the SW-01 replica holds 20 BB pellets which are at each time put into the chamber by the charging the 4-stroke bolt ( just like in the majority of sniper rifles ). There is a 310mm long mounting rail located on the top of he replica which allows the mount of additional accessories.
Besides the aforementioned bipod the set also included a 3-9x50 scope which comes with a mount, a illuminated Mil-Dot reticle ( also with a reticle allowing to specify the distance to the target ). The illumination is adjustable in a 0 to 10 scale. The manufacturer ensures that the inner mechanism is fully compatible with the APS-2 mechanism. The Hop-Up system is located inside the magazine well.
What's especially interesting in this replica is the A-TACS AU® camouflage printed onto it. It has been made using an incredibly precise method of applying paint to objects called a water transfer.
Note: The picture was presented a sample copy. Due to the irregularity of the applied camouflage, the actual look may vary slightly from shown in the picture.
The set includes:
- the replica,
- a magazine,
- a bipod,
- a scope,
- a 22mm RIS rail mount,
- a RIS mounted carrying handle,
- a BB pellet speed-loader,
Details regarding the scope:
Length: 415 mm (including the sun-shader),
Lens’ diameter: 50 mm,
Magnification: 3-9 x,
Aiming reticle: Mil-Dot + range finder,
Reticle’s adjustment: yes,
Reticle’s illumination: yes, red,
Illumination’s adjustment: 0-10 x,
Lens’ covers: Yes, two flip-up type,
Color: black,
Weight: 600 g.
Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | ~480 |
| Fire mode | Single |
| Made of | plastic + metal |
| Length [mm] | 1245 |
| Inner barrel length [mm]. | 590 |
| Weight [g] | 6790 |
| Magazine type | Low-Cap magazine |
| Magazine capacity [pcs.] | 20 |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | A-TACS / ATC |