Complete Reinforced Gearbox V3 (AK) with Micro-Contact
(Top-Wired)
A complete, reinforced gearbox version 3 dedicated for AK
replicas. It is an ideal solution for people wanting to purchase a good-quality
gearbox at a reasonable price. The frame has been adapted for the use with 8 mm
slide bearings and thanks to the construction reinforced at the most vulnerable
spots it can be used in combination with more powerful springs. The gearbox
features a compatible quick spring change system.
The Enter & Convert system enables a rapid
and quick adaptation of the power of the replica to conditions expected on
the airsoft playing field without the necessity to disassemble the entire
gearbox and therefore having the access to a workshop or a set of special
tools. Once the gearbox has been taken out of the replica’s body, the process
of spring change lasts literally mere seconds. The spring along with the
guide needs to be taken out through the opening in the rear wall of the frame.
Following parts are included inside: reinforced 18:1
steel gears; an m110 spring; a lightweight, polymer
piston with a steel, last tooth; a polymer, air-sealed piston head; a cylinder
head with a soft dampener; an aluminum, type 0 cylinder; a polymer nozzle and a
spring guide. The exchanged configuration can generate a muzzle velocity of 400
- 420 FPS, depending on the replica.
The characteristic feature of this frame is that it is
adapted for the included in the set micro-contact instead of classic,
typically-used plates, which significantly improves their trigger reaction and
extends the lifetime of LiPo batteries.
This version is top-wired.
Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 |
| Bearings diameter [mm] | 8 |